Page 1 of 1
Bar ceiling
Posted: Sun Jan 27, 2019 5:36 pm
by Roger
Thanks to Peter and Adrian for the super job on the bar ceiling. Insulated above as well ! Electrics by Dave A and
ongoing painting by Kevin.
The jetty has had some more fettling from David B and Andrew..... but the tide was too high today to view.
And work on the galley is progressing.
Cheers all
Roger
..
.
- 1-bar43.jpg (55.44 KiB) Viewed 3220 times
Re: Bar ceiling
Posted: Mon Jan 28, 2019 3:33 pm
by dr.syn
Great job guys
Sorry I could not be there to help.
Dave, re fendering, how about heavy wall plastic hose if they do it in large bore
Re: Bar ceiling
Posted: Thu Jan 31, 2019 9:04 am
by davidb
If someone has time to look for some I would be very grateful. If someone has some thin walled 6" bore straight drain pipe, we could try cutting a 3 1/2 inch wide slot down one side and clip it over. Gilly said he might be able to find some to try.
I shall send an email out to all members on the subject shortly to ask for help. I'm very busy just now.
cheers, David
.
.
.
.
Re: Bar ceiling
Posted: Thu Jan 31, 2019 10:22 am
by dr.syn
Are you sure drainpipe won't shatter, it might get bumped quite hard, or is that for some other use?
Re: Bar ceiling
Posted: Thu Jan 31, 2019 7:24 pm
by davidb
Guttering downpipe and household interior type pipe is flimsy but the Osma type of orange underground pipe or gas or water pipe is a lot stronger, but it would have to be in straight lengths to be usable and is probably pretty expensive. We need about 30M of it.
Have a look at the drainage pipe I used for the horizontal guides down the sides of Sandpiper. Don't know how long it with withstand sunlight though.
cheers, David